Finishing balsa on platform 210x70mm

An alder board with a glued balsa is designed to carry out the process of finishing and deburring. The soft porous wood makes it easy to apply and hold abrasive pastes, suspensions and powders on the work surface. The size of the board on the working surface is the same as that of most full-sized stones for manual sharpening - 210x70mm. Height - 30mm allows you to work comfortably even without using any holders or stands. The thickness of the balsa layer is 6mm. Alignment, as well as the removal of the surface layer of balsa to clean the surface, is carried out on sandpaper.
For deburring can be used in its pure form, without the use of pastes.
The size of the working surface is 210x70 mm.
Country of origin Ukraine
Type Wooden platform with finishing balsa
Fingerboard materialSoft porous balsa wood
Platform material Alder
Platform height with balsa 210x70x30mm
Balsa thickness6 mm
Blister packaging