Bar BORIDE CS-HD 1000grit 150x12x6mm

Boride stone of the CS-HD series in 1000 grit, the standard size is 152x12x6 mm (6 ”x1 / 2” x1 / 4 ”). The average grain size in sifting is about 4 microns. The stone is designed for the stages of finishing. Used to remove scratches from previous stages of sharpening, for example, after the bar Boride CS-HD 800 grit. The recommended grain size for the subsequent Boride CS-HD series stone in the 1000 grit phase is the Boride CS-HD 1200 grit bar (ANSI).
The Boride CS-HD series is one of the few series of bars produced by Boride, which is based on abrasive grains of silicon carbide. The Boride CS-HD series has medium hardness bonds and works equally well with both carbon and chromium-containing, high-alloy and powder steels thanks to the silicon carbide abrasive grain. The Boride CS-HD series has extended recommendations for the hardness of machined steels from hard knife steels to fairly soft stainless materials.
The Boride CS-HD series works with both oil and water coolants, however, since the Boride CS-HD grindstone series is not impregnated, ie. the abrasive space is not filled with a special composition that prevents the entrapment of processing products between the abrasive particles (salting). Lubricating fluid penetrates into the stone during operation. To increase the productivity of the material removal process and increase the comfort of work, it is recommended to use low-density coolant, water or specialized coolant from Boride Bori-Lube in this case, usually better oil. Alignment of a bar is carried out on glass, on silicon carbide powder. During operation and when cleaning from salting the use of household detergents is allowed. The Boride CS-HD series handles both hard tool and carbon steels and mild chrome steels equally well. The Boride line of grinding stones of the CS-HD series presents bars with abrasive ability of only peeling range in 120, 150, 220, 320, 400, 600, 800, 1000, 1200 grit in various form factors - 152х1), 152х12х6мм (6 ”x1 / 2 (X1 / 4 ”) and 152x25x12mm (6” x1 ”x1 / 2”).