Your shopping cart is empty!
13056
Model:
13056
375.20 грн
  0 reviews
Promotions and discounts
Sending parcels at 16.00
Grommet for SKK eyelets (made in USA) 4.7 mm (3/16 in.)
The rivet flaring kit is designed for mounting eyelets in a 4.7 mm (3/16 inch) hole for fastening parts of KYDEX, HOLSTEX, BOLTARON thermoplastic structures or for decorative purposes. The flaring set consists of two parts - a die and a punch (striker), which are milled from high quality stainless steel. To increase tool life, the working surfaces of the die and punch are hardened and polished. To install the grommet, it is inserted into the holes of the parts to be joined and placed head down on the matrix. From above, a striker is attached to the non-flared part of the grommet and lightly hit it with a hammer. If the eyelet did not flare sufficiently from the first blow, then the operation is repeated again. This simple tool and economical flaring method will reduce the cost of thermoplastic handling equipment as well as minimize the need for a workbench. It doesn't take a lot of skill to get excellent flaring results, it can be achieved with a minimum of practice in this matter.

Designed for eyelet cap diameter: 7.3 mm
Mounting hole diameter: 4.7 mm (3/16”)
Roll material: hardened stainless steel
Weight: 45 grams
Reviews: 0

There are no reviews for this product.

Questions: 0

No questions about this product.

Recommended to watch
Similar Products
12215
Thread waxed flat 1mm (100m) light green
Thread waxed flat 1mm (100m) light green
86.40 грн
12216
Thread waxed flat 1mm (100m) orange
Thread waxed flat 1mm (100m) orange
86.40 грн
12217
Thread waxed flat 1mm (100m) black
Thread waxed flat 1mm (100m) black
86.40 грн
12218
Thread waxed flat 1mm (100m) dark brown
Thread waxed flat 1mm (100m) dark brown
86.40 грн
12219
Thread waxed flat 1mm (100m) white
Thread waxed flat 1mm (100m) white
86.40 грн