Your shopping cart is empty!
Model:
12777
Brand:
Shapton
740 грн
  0 reviews
Promotions and discounts
Sending parcels at 16.00
Bar Shapton Pro 1000 grit, size 110x70x15mm, glued from two cuts, 55mm long. When sharpening small cutting tools, it is often very inconvenient to use large, full-sized stones. You have to sectorally use the work surface, organize a workplace under a large stone, and the budget component of the cost of a large stone is also important. The use of small cutoffs measuring 70x55x15mm is also not always convenient due to the possible lack of working surface area, difficulties in installing in standard sharpening stone holders and stability on the mounting plane.
The proposed version of two glued 55 mm cuts makes it possible to obtain a working surface of 110x70 mm, which will combine the advantages of working on large and small stones. In the place of gluing, the edges of the stone are ideally trimmed, so the thickness of the seam is minimal. The glue has a lower density than the stone, so the presence of a seam is not felt when sharpening. The cost of such a bar in the size of 110x70x15mm per unit area is several times lower than the cost of a full-sized stone, so this is a good option for those who want to try the quality of the legendary Japanese water stones of the Shapton Pro series for a very small fee.
As you know, for comfortable sharpening, the length of the grinding bar must be no less than the length of the cutting edge of the tool being sharpened. Those. on these stones, you can freely sharpen not only specialized cutting tools, but knives with short and medium blades. These stones can be used as a hiking option, they are easy to transport, lightweight and do not take up much space. As a rule, when improving skills over time, for high-quality sharpening, a person needs a stone of ever smaller sizes. The reduced version of the SHAPTON PRO stone may be of interest to craftsmen who have reached a certain level of perfection.
In conclusion, I would like to say that in the recommendations of SHAPTON for sharpening one or another type of cutting tool or products made of certain steels, as a rule, there is a set of three or four stones of different grit. Those. most often, to successfully solve your range of tasks, you do not need to have a complete set of all the stones of the SHAPTON PRO series, but it is quite enough to have only three stones with different grain sizes from the entire list. So, for example, if you will sharpen mainly kitchen knives, then SHAPTON recommends a set of three stones in 320, 1500 and 5000 grit. To sharpen chisels and plane irons, you will need to have a set of only stones of 120, 1000 and 5000 grit.
Country of origin - Japan
Name - SHAPTON
Producer - SHAPTON CO,.LTD
Series - SHAPTON Professional Series
Grit - 120, 220, 320, 1000, 1500, 2000, 5000, 8000, 12000, 30000
Abrasive material Alumina/silicon carbide
Stone size - 70x110x15mm
Recommended coolants - clean water at room temperature
Weight - 300 grams
Reviews: 0

There are no reviews for this product.

Questions: 0

No questions about this product.

Similar Products