Water-based leather adhesive EcoSar MW116

Glue Ecosar 116/1000 is an aqueous solution of synthetic latex, a white liquid, almost odorless. Designed for bonding leather and synthetic materials. Apply with a sprayer or brush. After applying to both surfaces to be bonded, allow to dry for 10 minutes, then press firmly for a few seconds.

The maximum gluing effect is achieved when working with glue at a temperature of 20-24ºС. At temperatures below 10ºС, gluing properties deteriorate significantly, it is necessary to withstand the adhesive at a temperature of 20-24 gr.

Store at a temperature not lower than +10ºС for no more than 6 months. Long-term cooling down to 0°C is not recommended.