Your shopping cart is empty!
Model:
10367
Brand:
Norton
1,443 грн
  0 reviews
Promotions and discounts
Sending parcels at 16.00

Along with one of the most famous stones from the company Norton from the United States of America - Norton 8" Crystolon is no less popular among sharpening fans.
Unlike India, the presented Kristalone uses silicon carbide grains. At the same time, the coarse and fine sides are slightly rougher than those of similar stones in India.
The average size of the abrasive grain on the Coarse side is about 130 microns (P120 according to FEPA classification). The average size of the abrasive grain on the Fine side is about 45 microns (P320 according to FEPA classification). The stone comes from the factory impregnated (impregnated) with oil.
The size of the Norton 8" Crystolon abrasive stone is 1" x 2" x 8" in inches or 23x52x203 mm. At the same time, the thickness of the Fine stone is 10 mm, which is significantly less than the thickness of the Coarse stone, which is 13 mm.
Norton's 8" Crystolon is made in Mexico. The geometry of the bar from the factory is good, the stone does not require additional alignment, as well as “cheering up” the working surface of the abrasive before the first use. Initially, the stone comes without radial chamfers on the edges (it is recommended to round the edges of the bar before the first use).
The stone bond of the Norton 8" Crystolon bar is hard, the stone holds the geometry very well, but at the same time has a very high metal removal rate. Works equally well with stainless, high alloy and carbon steels. can be easily removed with warm water or oil.Although the stone is oily, it can be used with other coolants that have a lower density than oil to increase the metal removal rate.For example, when working with water, the metal removal rate increases.Additional characteristics Country US origin
Manufacturer Norton
Grit coarse/fine
Material Silicon carbide
Ceramic bond
Dimensions 203x52x23 mm.

Basic

Country of origin
USA
Brand
Norton Crystolon
Manufacturer
Norton
Grain
Fine, Coarse
Abrasive material
silicon carbide
Stone size
203х52х25mm
Polishing Lubricant
sharpening oil or water
Weight
700 g.
Reviews: 0

There are no reviews for this product.

Questions: 0

No questions about this product.

Similar Products