Your shopping cart is empty!
Model:
10313
Brand:
Naniwa
2,849 грн
  0 reviews
Promotions and discounts
Sending parcels at 16.00

Large leveling plates NANIWA Flattening Stone are ideal for restoring the working surface (eliminating "saddles" after sharpening, removing various defects in the form of chips and irregularities, as well as pointing radius chamfers on the edges) of sharpening stones with a grain size of up to 1000 grit.

    The abrasive grain of the leveling plate is silicon carbide. Alignment can be done both on the own grinding stone suspension and using silicon carbide powder. Before leveling, the stone must be soaked and the surface of the slab moistened. To level the grinding stone, you need to move along the path in the form of a figure eight, pressing its working surface against the plate. Do not apply excessive pressure, as this may disturb the parallelism of the sides of the grinding stone. After use, the leveling plate should be thoroughly rinsed under running water to remove any remaining stone abrasive and silicon carbide powder. The leveling plate comes with removable rubber feet to prevent slipping during use. Platform size: 300 x 150 x 20 mm (12 x 6 x 3/4 inch), weight - 2.4 kg<

Basic

Country of origin
Japan
Brand
NANIWA
Manufacturer
NANIWA ABRASIVE MFG. CO., LTD
Series
Professional Stones (CHOSERA)
Grain
400, 600, 800, 1000, 2000, 3000, 5000, 10000
Abrasive material
Aluminium oxide
View
Bench Stone
Stone size
210x70x20mm
Polishing Lubricant
clean water
Weight
800 gram
Reviews: 0

There are no reviews for this product.

Questions: 0

No questions about this product.

Similar Products