Set Blade R2 (carbon steel 130mm)

The blade from the R2 set is made of 66Mn4 carbon steel. The length of the blank blade for the R2 knife is 130mm, the total length is 254mm. Butt thickness - 4mm, blade height - 29mm.

In addition to sampling to reduce the weight of the blade, the blank has three holes on the shank, two of which are 5.1 mm mounting holes for attaching linings, and the third 6 mm can be used as a lanyard. Mounting of linings is carried out with the help of screw couplers. The R2 blade is hardened to a hardness of 57-59 HRC. The blade has descents from the butt, reduction of 0.4 mm. Also, the R2 blade is equipped with a small false blade on the butt and a fin to stop the thumb.

Since the R2 blade is made of carbon steel, which is prone to corrosion, the knife must be cleaned and wiped dry after use. In case of need for long-term storage, the knife blade must be lubricated with oil. The inconvenience of the low corrosion resistance of the R2 blade is compensated by the excellent cutting characteristics.

Screed, head type "fungus".

- cap diameter - 7.4 mm;
- cap height 2.5 mm;
- thread - M4;
- screw thread length - 6 mm;
- outer diameter of the sleeve - 5 mm;
- sleeve length - 9 mm.
The pads are made of ebonite, the thickness of the pad is 9mm.

Country of origin - Ukraine
Manufacturer - BPS
Hardness 57-59 HRC
Mounting type - For surface mounting
The weight of the set is 225 g.
Blade height - 29mm
Blade length - 130mm
Overlay thickness - 9mm
Lining material - ebonite
Steel - 66Mn4
Blade thickness - 4mm