Stone Suehiro Cerax 707 (700grit) 205x73x29mm

Suehiro Co., Ltd is one of the most successful and dynamic sharpening stone manufacturers in Japan. Despite the fact that its products are firmly held in the middle price range in the abrasive market, these stones are preferred by most professionals as their main working sharpening stones due to the excellent price / quality ratio of these products. Suehiro CERAX 707 stones have a working surface of 205x73mm and are slightly thicker than the 29mm honing stones. Stones Suehiro CERAX 700 grit - water, only clean cold water can be used as coolant. The stones are glued to a stand-holder with rubber feet that have a very good grip even on a wet, flat surface, which prevents the structure from slipping during sharpening. The kit, along with the sharpening stone, includes a small cleaning stone measuring 72x18x10 mm. It is used to clean the working surface of the stone from clogging and leveling minor deviations in the geometry of the bar. Nagura is made of a different material than stone, it contains additives from metal oxides to improve cleaning properties and confidently remove metal chips from the inter-abrasive space on the working surface. Thanks to this, with the help of a cleaning stone, it is possible to effectively remove clogging, remove shallow scratches and even trim the sharpening stone itself a little. Suehiro CERAX 700 grit stones can be leveled in any convenient and affordable way (on glass with silicon carbide powder, on slabs of various materials, using special leveling stones). However, since Suehiro CERAX 700 grit stones have a fairly soft bond and fine grain, the most acceptable method to smooth the surface of the stone seems to be smoothing on glass with water on the stone's own slurry. Before any use of the stone, including leveling, it should be soaked for 10-15 minutes in clean, cold water. CERAX 707 Medium Whetstone grit 700 (WA) are ideal for both professionals and home users who want to achieve a higher quality sharpening.