Arashiyama 6000 grit bar for use in Apex type grinders has dimensions of 150x25x6mm, glued onto an aluminum blank 3mm thick, finished and completely ready for use. Stone Arashiyama 6000 grit - water, recommended coolant - clean water at room temperature. Before any use, be it sharpening or leveling, it is recommended to soak the stone for 5 minutes in water. Arashiyama 6000 grit bar has an open, non-impregnated structure, absorbs water quite actively and retains it very well. Dries for a long time. The stone contains in a bunch of active components that adsorb sludge, so it is practically not salted. Mining from the surface of the stone is easily removed simply under running water without additional effort. Alignment of the Arashiyama 6000 grit stone, if necessary, is carried out on glass, on silicon carbide powder.
Arashiyama 6000 grit stone is made on the basis of a natural abrasive - silicon dioxide and alumina on a synthetic complex binder with magnesia, ceramic and organic components. Bond of medium hardness. The Arashiyama 6000 grit stone releases suspension quite actively when sharpening. Working with slurry gives a higher surface finish than working without it. The metal removal rate is medium. The stone is recommended to be used as a finishing stone for a wide range of cutting tools from knives, planer irons, chisels, etc. Arashiyama 6000 grit stone will certainly be of interest to a wide range of professionals and amateurs of sharpening on Japanese water natural stones.
There are no reviews for this product.
No questions about this product.