Full-sized bar Kitayama #8000 has dimensions of 205x75x25mm, finished and completely ready for work. Stone Kitayama 8000 grit - water, recommended coolant - clean water at room temperature. Before any use, be it sharpening or leveling, it is recommended to soak the stone for 5 minutes in water. Kitayama 8000 grit bar has an open, non-impregnated structure, absorbs water quite actively and retains it very well. Dries for a long time. The stone contains in a bunch of active components that adsorb sludge, so it is not very salty. Alignment of Kitayama 8000 grit stone, if necessary, is carried out on glass, on silicon carbide powder.
Kitayama 8000 grit stone is made on the basis of a natural abrasive - silicon dioxide and alumina on a synthetic complex binder with magnesia, ceramic and organic components. Bond of medium hardness. The Kitayama 8000 grit does not release much slurry when sharpened. Working with slurry gives a higher surface finish than working without it. The metal removal rate is medium. The stone is recommended to be used as a pre-finish razor or finishing stone for a wide variety of cutting tools from knives, planer irons and chisels to scissors.
There are no reviews for this product.
No questions about this product.
