For sharpening small cutting tools (jewelry, manicure, medical, etc.), as well as when sharpening tools with small cutting edge lengths (chisels, planer irons, etc.), stones of standard sizes are too large in size, which leads not only to inconvenience during storage and maintenance of grinding bars, but also entails extra costs for the purchase of abrasives. For such cases, so that you can use the highest quality whetstones made in Japan and at the same time not overpay - our company offers 3.5 times shorter Kitayama series stones. The width and thickness of such a bar remains the same as in the original stone 74 * 25mm, and the length is about 50 mm.
The Kitayama 8000 grit short bar is finished and ready to go. Stone Kitayama 8000 grit - water, recommended coolant - clean water at room temperature. Before any use, be it sharpening or leveling, it is recommended to soak the stone for 5 minutes in water. Kitayama 8000 grit bar has an open, non-impregnated structure, absorbs water quite actively and retains it very well. Dries for a long time. The stone contains in a bunch of active components that adsorb sludge, so it is not very salty. Alignment of Kitayama 8000 grit stone, if necessary, is carried out on glass, on silicon carbide powder.
Kitayama 8000 grit stone is made on the basis of a natural abrasive - silicon dioxide and alumina on a synthetic complex binder with magnesia, ceramic and organic components. Bond of medium hardness. The Kitayama 8000 grit does not release much slurry when sharpened. Working with slurry gives a higher surface finish than working without it. The metal removal rate is medium. The stone is recommended to be used as a pre-finish or finish stone for a wide variety of cutting tools - knives, planer irons and chisels, etc.
There are no reviews for this product.
No questions about this product.
