Your shopping cart is empty!
Model:
11763
Brand:
Otani
607 грн
  0 reviews
Promotions and discounts
Sending parcels at 16.00

Kitayama 8000 grit bar for use in Apex type grinders has dimensions of 150x25x6mm, pasted on an aluminum blank 3mm thick, finished and completely ready for use.

Stone Kitayama 8000 grit - water, recommended coolant - clean water at room temperature. Before any use, be it sharpening or leveling, it is recommended to soak the stone for 5 minutes in water. Kitayama 8000 grit bar has an open, non-impregnated structure, absorbs water quite actively and retains it very well. Dries for a long time. The stone contains in a bunch of active components that adsorb sludge, so it is not very salty. Alignment of Kitayama 8000 grit stone, if necessary, is carried out on glass, on silicon carbide powder.

Kitayama 8000 grit stone is made on the basis of a natural abrasive - silicon dioxide and alumina on a synthetic complex binder with magnesia, ceramic and organic components. Bond of medium hardness. The Kitayama 8000 grit does not release much slurry when sharpened.

Working with slurry gives a higher surface finish than working without it. The metal removal rate is medium. The stone is recommended to be used as a finishing stone for a wide range of cutting tools from knives, planer irons, chisels, etc. Stone Kitayama 8000 grit will certainly be of interest to a wide range of professionals and amateurs sharpening on Japanese water natural stones.

Reviews: 0

There are no reviews for this product.

Questions: 0

No questions about this product.

Similar Products