+38 095 285 50 50
Vodafone Kyivstar Life

Your shopping cart is empty!
12318
Product Code:
12318
Brand:
Brisa
259.72 грн
  0 reviews
Promotions and discounts
Sending parcels at 16.00

The blank for the Paring 90 blade from Brisa is made for surface mounting, the blade height is 22 mm, the length is 85 mm, the butt thickness is 1.5 mm. The total length of the workpiece is 205 mm. This is a blank for a kitchen utility knife, with which most of the work in cooking is usually performed. The blade structure is implemented in the form of a so-called "double wedge". Those. descents are made from the butt and from the handle to the tip, a wedge-shaped narrowing is also made. Such a blade geometry is quite laborious to manufacture, but allows for a very effective cut. The knife seems to fall into the cut product, experiencing a minimum of resistance. The workpiece is designed for an ergonomic handle, very comfortable to use. The blade is sharpened, at first glance the knife is very sharp. But this is just a technological sharpening, which indicates the angle that the manufacturer recommends for sharpening this product in the future. Therefore, looking ahead, let's say that after manufacturing the knife should still be sharpened for real.

The material of the blade blank is corrosion-resistant rolling martensitic steel X45CrMoV15 with molybdenum and vanadium alloying additions. Composition: 0.45% carbon, 14.35% chromium (Cr), 0.48% molybdenum (Mo), 0.12% vanadium (V).

Explanation of the abbreviation marking X45CrMoV15:

The designation X tells us that the steel has alloying elements that provide unique properties such as corrosion resistance, hardness, strength, etc.

The number 45 indicates the percentage of carbon content, which actually makes iron - steel. The carbon content of the alloy is 0.45%, which, with adequate heat treatment, gives the metal fairly good strength and hardness.

The symbol of the chemical element Cr (chromium) in the designation of the steel grade indicates the presence of this metal in the alloy. Chromium performs several functions at once - it affects the ability of steel to harden and improves the structure of steel, gives the alloy anti-corrosion properties, and increases its wear resistance.

Mo - molybdenum, the presence of which in the ligature prevents the fragility of the blade, increasing its rigidity, making the steel more resistant to high temperatures.

V - vanadium, a very important alloying element for steels, the admixture of which, even in small quantities, significantly improves the mechanical properties of steel and enhances the effect of other alloying elements, in particular chromium.

And finally, the number 15 tells us about the total amount of carbon and alloying additions in the alloy - 15%.

With a relatively low cost of blades made of X45CrMoV15 steel, knives made of it have unique properties and are the best choice for both professionals and home use, due to the high hardness of the alloy, exceptional cutting power, long-lasting sharpness of the blade edge and special metal microstructure. Sufficient carbon content in the X45CrMoV15 steel composition gives the blade an optimal hardness - about 58 HRC. Knives made of such steel hold sharpening longer, do not change their color, are less susceptible to oxidation, are ideal for intensive use and retain their excellent appearance throughout their entire service life. Experts recognize that X45CrMoV15 steel is the optimal balance between strength and hardness for a knife.

The blank for the Paring 90 blade is made by stamping. Until recently, such knives were significantly inferior in quality to expensive forged knives. However, with the advent of new technologies, the gap in quality parameters between forged and stamped knives is getting smaller. Stamped blades are cut from a sheet of rolled steel, then they are given the appropriate shape, hardened and sharpened. The process takes less time than forging, but results in lighter, thinner blades that are less expensive and can withstand repeated sharpening. To date, knife blades made of rolled steel are close in properties to forged blades. Stamped knives are distinguished by good ergonomics and less weight than forged knives.

More

Country of origin
Finland
Manufacturer
Brisa Knives Finland
Hardness
58 HRC
Mount type
Surface mounting
Blade height
22mm
Blade length
85mm
Blade thickness
1,5mm
Steel
X45CrMoV15
Weight
53 g.
Reviews: 0

There are no reviews for this product.

Questions: 0

No questions about this product.

Similar Products
12321
Japanese blade Migaki Nakiri Tosa 165 mm
Japanese blade Migaki Nakiri Tosa 165 mm
4,521.02 грн
12322
Japanese blade Migaki Yanagiba Tosa 210 mm
Japanese blade Migaki Yanagiba Tosa 210 mm
3,358.30 грн
12323
Japanese blade Migaki Yanagiba Tosa 240 mm
Japanese blade Migaki Yanagiba Tosa 240 mm
3,558.68 грн
12324
Japanese blade Migaki Yanagiba Tosa 270 mm
Japanese blade Migaki Yanagiba Tosa 270 mm
4,418.68 грн
12326
Japanese Blade Kurouchi Santoku Tosa 150mm
Japanese Blade Kurouchi Santoku Tosa 150mm
3,358.73 грн
12339
Japanese blade Migaki Gyuto TOSA-HC106-B1-180-NH
12507
Japanese blade Migaki Deba Tosa
Japanese blade Migaki Deba Tosa
4,474.15 грн
12508
Japanese blade Kurouchi Ajikiri Tosa 90mm
Japanese blade Kurouchi Ajikiri Tosa 90mm
2,318.56 грн
12512
Blade BRISA Polar 85
Blade BRISA Polar 85
541.37 грн
12513
Blade BRISA Lauri Skinner 72
Blade BRISA Lauri Skinner 72
630.38 грн
12514
Blade BRISA Polar 95 Hammered
Blade BRISA Polar 95 Hammered
763.68 грн
12515
Blade BRISA Polar 62 Hammered
Blade BRISA Polar 62 Hammered
718.96 грн
12516
Blade BRISA Polar 125
Blade BRISA Polar 125
763.68 грн
12519
Blade BRISA Polar 62
Blade BRISA Polar 62
496.65 грн