+38 095 285 50 50
Vodafone Kyivstar Life

Your shopping cart is empty!
10728
Product Code:
10728
Brand:
Roks
40.42 грн
10 or more - 38.40 грн
50 or more - 36.38 грн
  0 reviews
Promotions and discounts
Sending parcels at 16.00

Bolster brass 24x16x4mm, with hole 12x2mm

Bolsters are a design element of a knife, which is designed to distribute bending mechanical loads that occur at the junction of the knife handle and blade.

For the manufacture of bolsters, as a rule, hard and durable materials are used, such as: metals (copper alloys / brass, bronze, cupronickel /, stainless steel, titanium, aluminum alloys, etc.), non-prickly and hard woods, horns / bones /animal teeth, as well as various hard plastics (polyester, acrylic, bakelite, etc.). The most commonly used material for bolsters is brass, as the material is relatively cheap, easy to work with, effectively fits into the design of any knife and always complements any handle inlay.

The presented blanks for bolsters are made of LS-59 brass (the so-called loose brass), which is very easily subjected to any machining (sawed, ground, polished), while it is wear-resistant and easy to clean. The composition of brass brand LS-59 includes up to 60% copper, about 40% zinc and up to 2% lead. It is the presence of lead in the composition of the alloy that reduces ductility (compared to two-component alloys) and makes it possible to effectively process it by cutting to obtain small chips. The workpiece is an ellipse, along the contour of which you can easily fit the adjacent handle. Since the material of the handle is usually much softer than brass, when fitting with sanding, it is recommended to apply it (grinding) to a solid base in order to avoid parasitic sampling on the handle at the junction with the bolter.

The blanks are presented in the form of 24x16mm form factors, which are often used when mounting hunting knives and fins. The slot in the blank of the 12x2mm bolster will also fit the shanks of most blades used for flush mounting.

More

Country of origin
Ukraine
Material
brass
View
oval
Dimensions (edit)
24х16х4mm
Hole
12х2mm
Weight
10 g.
Reviews: 0

There are no reviews for this product.

Questions: 0

No questions about this product.

Similar Products
10760
Bolster stainless steel 24x16x4mm without hole
10757
Bolster stainless steel 34x22x4mm without hole
13265
Mokume-Gane 44х20х4mm
Mokume-Gane 44х20х4mm
719.82 грн
12077
Artificial stone spacers 30x30x10mm Coral
Artificial stone spacers 30x30x10mm Coral
237.36 грн
12078
Artificial stone spacers 30x30x10 mm Marble
12079
Artificial stone spacers 30x30x10 mm turquoise
12080
Artificial stone spacers 30x30x10 mm Jasper
12081
Artificial stone spacers 30x30x10 mm strips
12082
Artificial stone spacers 30x30x10 mm Cobalt
12083
Artificial stone spacers 30x30x10 mm Nifrit
12084
Artificial stone spacers 30x30x10 mm colored