Stone NANIWA Combi Series Stone 800/5000grit 210x70x20mm

NANIWA Sharpening Stones 800/5000 the size of these stones is 210*70*20 mm. Description of the abrasives included in the NANIWA Combi Series compound stones. NANIWA Sharpening Stones have a slightly softer bond than NANIWA Professional Stones or NANIWA CHOSERA for the Japanese market. The size of these stones is the same - 210x70x20 mm. NANIWA Sharpening Stones work great with hard steels, especially carbon steels, and are recommended for use with traditional Japanese knives and blades. They have excellent response when working with Japanese steels such as SK5, SHIROGAMI, AOGAMI and the like. NANIWA Sharpening Stone does not require pre-soaking before use, it is enough to moisten the working surface of the stone before work with a spray gun or a brush. NANIWA Sharpening Stone 800 grit is an orange-colored stone, dimensions 210x70x20 mm, average grain size is about 15 microns. Designed for the initial sharpening operation after coarse rough stones (Coarse Stones) in the NANIWA Sharpening Stone series. NANIWA Sharpening Stone 5000 grit is a white stone, dimensions 210x70x20 mm, average grain size is about 3 microns. Designed for the finishing operation of finishing the cutting edge and preparing it for the polishing operation. NANIWA Multi Series stones are the best solution for manual home sharpening, ideal for knives and any other cutting tools. Supplied without stand. Name NANIWACountry of origin JapanCombi Series StoneMaterial Aluminum oxideDelivery without standDimensions (Sharpening stones) 210x70x20 mmRecommended coolant clean, cold water