Whetstone BORIDE wide AM-K, 150х25х6 mm, 600 grit

AM-K series Boride stone, 600 grit, standard size - 152x25x6mm (6”x1”x1/4”). The average grain size in sieving is 10 µm. Stone category Medium, designed for medium stages of sharpening. Used to remove scratches from previous sharpening steps, such as after a 400 grit stone.

 

The Boride AM-K series is made of aluminum oxide (single crystal white electrocorundum) on a medium hard ceramic bond. AM-K series stones work well with all types of steels and are designed for all stages of peeling, the formation of supplies, repairs of a blade of medium complexity, as well as the initial and main stages of sharpening. The stone is exceptionally good at removing scratches and damage to metal from rough abrasive stones.

A series of grinding stones Boride AM-K is not impregnated, i.e. the inter-abrasive space is not filled with a special composition that prevents the products of processing from getting stuck between the particles of the abrasive (loading). The manufacturer allows working with coarse rough stones (including grit 220 and below) both with lubricating fluids and without the use of any coolant, i.e. dry. The lubricating fluid during operation penetrates into the stone. To improve material removal performance and comfort of work, it is recommended to use low density cutting fluid, water, or Boride Bori-Lube Specialized Coolant in this case, as a rule, it is preferable to oil. The leveling of the bar is carried out on glass, on silicon carbide powder. During operation and when cleaning from salting, the use of household detergents is allowed. The Boride AM-K series of whetstones includes a list of whetstones with various abrasive capacities up to 600 grit. The complete set of the AM-K series includes grits: 100, 150, 180, 220, 320, 400, 600 grit in various form factors - 152x25x6mm (6”x1”x1/4”), 152x12x6mm (6”x1/2”x1/ 4”) and 152x25x12mm (6”x1”x1/2”).